{
  "target_application": "Point-of-Care Testing (POCT) Devices",
  "physical_properties": {
    "density": "1.12",
    "tensile_strength": "8.5",
    "max_service_temperature": "200.0",
    "hardness": "50A",
    "standard_tolerance": "+/- 0.005 mm (Conforming to ISO 286 Grade IT5-IT6)"
  },
  "manufacturing_limits": {
    "equipment_hard_specs": "Clamping Force: 6000 kN (approx. 600 metric tons). Distance between Tie Bars (H x V): 920 x 920 mm. Max Shot Volume (PS): ~1450 cm³ (dependent on installed injection unit). Rotary Table Diameter: 1600 mm. Typically configured with two independent injection units (e.g., one horizontal, one vertical 'L-position') for multi-shot capability.",
    "min_feature_size": "Min Corner Radius: 0.2 mm (Note: This is difficult to maintain, costly, and requires frequent wheel dressing. R0.5mm or greater is strongly preferred for production.)",
    "equipment_precision_grade": "Capable of achieving IT8-IT10 on part dimensions under a stable process. Typical achievable tolerance is ±0.08mm to ±0.20mm, highly dependent on material selection (especially differential shrinkage), part geometry, and mold quality."
  },
  "commercial_parameters": {
    "factory_advantage": "Effectively molding low-viscosity, platinum-cured liquid silicone rubber like LR 3003/50 demands absolute process control to prevent flash, a common failure point that compromises optical clarity. The superior repeatability of the Arburg Allrounder H 600T's clamping unit is critical for maintaining parting line seals under 0.005 mm, cycle after cycle. We leverage the Selogica controller's advanced diagnostics to fine-tune injection profiles, ensuring complete mold fill without inducing stress or birefringence in the final POCT optical window. This single-step, net-shape molding capability on the Arburg eliminates the risk of cure inhibition from contaminants and removes the need for secondary deflashing operations that competitors often require, ensuring parts meet stringent FDA and ISO 13485 standards directly from the mold. This is a core competency at MechanoFab.",
    "target_volume": "Optimized for 10,000 - 1,000,000+ units"
  },
  "_dev_note_visual_proofs": "Currently empty by default. This array is a reserved structural hook. It will be asynchronously populated with YouTube/Video metadata by the 06_video_injector.py post-processing.",
  "visual_proofs": [],
  "mechanofab_connect": {
    "about_us": "MechanoFab is a premium managed manufacturing platform empowering global hardware innovators.",
    "instant_quote_url": "https://mechanofab.com/quote",
    "engineering_support_email": "rfq@mechanofab.com"
  }
}