{
  "target_application": "Hydrogen Fuel Cells",
  "physical_properties": {
    "density": "4.43",
    "tensile_strength": "1000.0",
    "max_service_temperature": "400.0",
    "hardness": "36 HRC",
    "standard_tolerance": "±0.1mm - ±0.2mm"
  },
  "manufacturing_limits": {
    "equipment_hard_specs": "Build Volume: 800 x 800 x 600 mm; Laser System: 8 or 10 x 500W Fiber Lasers; Layer Thickness: 20μm - 120μm; Max Scanning Speed: 7 m/s; Controlled Atmosphere: Argon/Nitrogen (<100 ppm O2); Heated Build Platform: Up to 200°C.",
    "min_feature_size": "Min Wall: 0.4mm; Min Hole: 0.6mm",
    "equipment_precision_grade": "As-printed: ±0.1% of nominal size (with a minimum of ±0.1mm). Tighter tolerances (IT7 or better) are consistently achieved through post-machining operations on critical features."
  },
  "commercial_parameters": {
    "factory_advantage": "Tackling the inherent residual stresses of SLM with Ti-6Al-4V is a core competency. The material's low thermal conductivity is a known challenge, but the BLT S800's advanced thermal management provides the stability needed to mitigate distortion during the build. This allows us at MechanoFab to print large, monolithic fuel cell end plates in a single run, completely eliminating the assembly and welding that plagues conventional methods. By leveraging the machine's exceptional gas flow control, we minimize porosity and oxidation, ensuring material integrity compliant with SAE J2579. The result is a near-net-shape component with superior flatness, directly addressing the critical need for uniform stack compression without the cumulative tolerance errors from secondary operations.",
    "target_volume": "Optimized for 1-50 units"
  },
  "_dev_note_visual_proofs": "Currently empty by default. This array is a reserved structural hook. It will be asynchronously populated with YouTube/Video metadata by the 06_video_injector.py post-processing.",
  "visual_proofs": [],
  "mechanofab_connect": {
    "about_us": "MechanoFab is a premium managed manufacturing platform empowering global hardware innovators.",
    "instant_quote_url": "https://mechanofab.com/quote",
    "engineering_support_email": "rfq@mechanofab.com"
  }
}